CorrosionX Aviation - 5 Gallon


MIL SPEC AVIATION CORROSION PREVENTON & CONTROL COMPOUND (QPL QUALIFIED) MIL-PRF-81309H Type II (current) MIL-PRF-81309H Type IV (current) MIL-PRF-81309G Type II (thru 2018) MIL-PRF-81309F Type II (thru 2014) MIL-C-81309E Type II (thru 2005) Boeing Part No.: RMO 16679 Pratt & Whitney Part No.: PWC15-011 Cessna Spec: CSNP038, Type 9A CorrosionX® Aviation takes corrosion control to a whole new level! Featuring the latest advances in Polar Bonding and Fluid Thin Film Coating (FTFC) technologies, CorrosionX Aviation is specially formulated to displace moisture, stop corrosion instantly and provide long-lasting protection. Made entirely in the USA, CorrosionX Aviation is qualified under MIL-PRF-81309 Rev. H Type II (replaces and supersedes MIL-PRF-81309G, MIL-PRF-81309F and MIL-C-81309E) for corrosion prevention and control on airframes as well as general purpose use, as well as MIL-PRF-81309H Type IV for advance corrosion preventive compound. Used extensively by the U.S. military as well as NATO forces, all CorrosionX products and application equipment have been assigned National Stock Numbers (NSN) by the General Services Agency (GSA) and are available for procurement through the Defense Logistics Agency (DLA). Corrosion X is the only product available to the public that meets the US Navy's tough new corrosion prevention and control performance requirement ( MIL-PRF-81309H ). Features Kills and prevents corrosion Long-lasting Polar Bonding Technology U.S. military proven to be more than 2X more effective* than other airframe corrosion prevention and control products Displaces moisture Penetrates and lubricates Self-curing Fluid Thin Film Coating (FTFC) technology Effective on all metals Safe on electronics Contains no waxes or silicones NOW QUALIFIED under MIL PRF-81309H Type IV Advanced Corrosion Preventive Compound The ability of this material to prevent corrosion and displace water make it particularly suited for service use. The combination of properties of MIL-PRF-81309 provide the necessary requirements for a corrosion preventing compound for use in the extreme naval aviation environment. Excellent for indoor protection and short-term protection outdoors where surfaces can be recoated when required. Low build treatment won’t attract dust and dirt, won’t add significant weight to small aircraft, and doesn’t interfere with the ability to inspect internal surfaces. Unsurpassed high performance multi-metal protection – combats degradation of ferrous metals, aluminum, magnesium and their alloys. Eliminates anodic and cathodic corrosion and shields against the slow diffusion of corrosive agents. Type IV is intended for use to prevent corrosion in corrosion prone areas. Aviation Applications Apply to airframe interiors, battery terminals, control cables, wheel hubs, rotor heads and trim drum actuators. Excellent for use on moving parts where some lubrication is required, such as hinges, bomb racks and sliding parts. Can also be used to prevent corrosion on electronics and electrical connections – often restoring functionality. Apply to electrical and avionic components such as micro switches, cannon plugs, antenna bases, circuit breakers and buss bars. Minimal Environmental Impact Product As of 2017, the volatile organic content (usually abbreviated as VOC or VOCs) of CorrosionX Aviation has been reduced to ZERO. Compare that to other common airframe corrosion inhibitors, which can contain as much as 58% VOC*. National Stock Numbers CorrosionX Aviation 16 oz aerosol NSN 8030-00-938-1947 CorrosionX Aviation 16 oz aerosols (case of twelve) NSN 8030-01-438-4093 CorrosionX Aviation 16 fl oz trigger spray NSN 8030-01-553-4684 CorrosionX Aviation 1 gallon NSN 8030-00-213-3279 CorrosionX Aviation 5 gallon NSN 8030-00-262-7358 CorrosionX Aviation 30 gallon NSN 8030-01-438-4114 CorrosionX Aviation 55 gallon NSN 8030-00-524-9487
Read more

Where To Buy

We're proud to be stocked in a number of specialty shops across the country.

Find Out More